1. Always strictly follow the safety rules prescribed for Shine Abrasives as well as the
instructions for the use of machines and/or electrical tools.
Always strictly keep to safety rules issued by organization responsible for the prevention
of accidents.
2. To avoid risks associated with the use of rotating tools it is strongly recommended to use
the utmost caution and concentration when working.
3. Always wear correctly sized gloves that allow the sensitivity necessary to operate the tool
correctly and give adequate protection in the event of the blade being touched during
use.
4. Install only tools in perfect condition that are recommended for the material to be worked
and that are suitable for the type of machine used.
5. Do not use cracked or deformed tools.
6. Check that the balancing, keying and centering of rotary tools is carried out correctly.
7. Mount the tool correctly using the proper tightening and adjustment devices.
8. Remove all tightening and adjustment devices before use.
9. Check that the tool rotates in the correct direction.
10. Always use safety glasses or protective screens to protect the eyes.
11. The work area and the area around the machine must be free of obstacles.
12. The work area must be properly lit.
13. Before starting any kind of work, install all the safety devices prescribed by the builder of
the machine or power tool.
14. The operator must be at least 18 years old and of the minimum age prescribed by the
laws in force. They must be adequately trained in the use of the machine or power tool.
15. Avoid using machines or power tools in the event of any illness or physical condition that
may reduce reflexes or awareness and increase exposure to risk.
16. Do not use the machine or power tool under the influence of alcohol or drugs.